$include command: include command
$origin command: origin command
/etc/exports file: etc/exports file
/etc/group file: etc/group file
/etc/passwd file: etc/passwd file
Access control list (ACL): applying to executables (FTP)
Access control list (ACL): NFS file protection
ADDRESS command: X.25 mapping database
Address Resolution Protocol (ARP): displaying packets using TCPDUMP
Address Resolution Protocol (ARP): HYPERchannel
Address Resolution Protocol (ARP): impostors
Address Resolution Protocol (ARP): interfaces
Address Resolution Protocol (ARP): mode
Address Resolution Protocol (ARP): NETCU commands
Address Resolution Protocol (ARP): parameters
Address Resolution Protocol (ARP): table
AFS database (AFSDB) record: DNS
Ancillary Control Process (ACP)
AUTHORIZE utility (OpenVMS): Client<NFS
Berkeley R Commands: R Services
BOOTP Server: BOOTP relay agent
Canonical name (CNAME) record: DNS
CERT: reporting security violations
Challenge Handshake Authentication Protocol (CHAP)
Classical IP over ATM: ARP support
Classical IP over ATM: qualifiers
Classical IP over ATM: receive packet rate
Classical IP over ATM: support
Classical IP over ATM: VCI support
cluster alias failover: limitations
cluster alias failover: operation
cluster alias failover: setting up
Cluster Name in the NAMED.HOSTS File
Compaq WAN Device Drivers: function
Compaq WAN Device Drivers: line specific information
Compaq WAN Device Drivers: qualifiers
Compaq WAN parameters: LINE SPEED
Compaq WAN parameters: PROTOCOL
Compaq WAN parameters: RECEIVE BUFFERS
Compaq WAN parameters: RETRANSMIT TIMER
Configuration: DECnet over IP tunnels
Configuration: Terminal Server Print Services
CREATE ACE_USER_DATABASE command: NETCU
data network identification code (DNIC)
Data Network Identification Codes (DNICs)
data terminal equipment (DTE): characteristics
DECnet over IP: troubleshooting
DECnet/OSI: outgoing access restrictions and
DECwindows: transport interface
DHCP address lease states: Abandoned
DHCP address lease states: Bound
DHCP address lease states: Free
DHCP address lease states: Offered
DHCP address lease states: Pinging
DHCP address lease states: Reserved for Secondary
DHCP address lease states: Static Assignment
DHCP Address Request and Allocation Process
DHCP dump files: address lease states
DHCP lease file statements: abandoned;
DHCP lease file statements: client-hostname “ hostname” ;
DHCP lease file statements: domain-name “ domain-name” ;
DHCP lease file statements: dynamic-bootp;
DHCP lease file statements: ends date;
DHCP lease file statements: FQDN “ fully-qualified-domain-name” ;
DHCP lease file statements: hardware hardware-type mac-address;
DHCP lease file statements: hostname “ hostname” ;
DHCP lease file statements: starts date;
DHCP lease file statements: uid client-identifier;
DHCP option data types: data-string
DHCP option data types: ip-address
DHCP option data types: string
DHCP option data types: uint16
DHCP option data types: uint32
DHCP options: option all-subnets-local flag;
DHCP options: option arp-cache-timeout uint32;
DHCP options: option boot-size uint16;
DHCP options: option bootfile-name
DHCP options: option broadcast-address ip-address;
DHCP options: option cookie-servers ip-address
DHCP options: option default-ip-ttl uint8;
DHCP options: option default-tcp-ttl uint8;
DHCP options: option dhcp-client-identifier data-string;
DHCP options: option dhcp-max-message-size
DHCP options: option dhcp-parameter-request-list
DHCP options: option dhcp-server-identifier ip-address;
DHCP options: option domain-name string;
DHCP options: option domain-name-servers ip-address
DHCP options: option extensions-path string;
DHCP options: option finger-server
DHCP options: option font-servers
DHCP options: option host-name string;
DHCP options: option ieee802-3-encapsulation flag;
DHCP options: option ien116-name-servers
DHCP options: option impress-servers
DHCP options: option interface-mtu uint16;
DHCP options: option ip-forwarding flag;
DHCP options: option irc-server
DHCP options: option log-servers ip-address
DHCP options: option lpr-servers ip-address
DHCP options: option mask-supplier flag;
DHCP options: option max-dgram-reassembly uint16;
DHCP options: option merit-dump string;
DHCP options: option mobile-ip-home-agent
DHCP options: option nds-context data-string;
DHCP options: option nds-servers ip-address
DHCP options: option nds-tree-name data-string;
DHCP options: option netbios-dd-server ip-address
DHCP options: option netbios-name-servers ip-address
DHCP options: option netbios-node-type uint8;
DHCP options: option netbios-scope string;
DHCP options: option nis-domain string;
DHCP options: option nis-servers ip-address
DHCP options: option nisplus-domain
DHCP options: option nisplus-servers
DHCP options: option nntp-server
DHCP options: option non-local-source-routing flag;
DHCP options: option ntp-servers ip-address
DHCP options: option option-nnn data-string;
DHCP options: option path-mtu-aging-timeout uint32;
DHCP options: option path-mtu-plateau-table uint16
DHCP options: option perform-mask-discovery flag;
DHCP options: option policy-filter
DHCP options: option pop-server
DHCP options: option resource-location-servers
DHCP options: option root-path string;
DHCP options: option router-discovery flag;
DHCP options: option router-solicitation-address ip-address;
DHCP options: option routers ip-address
DHCP options: option smtp-server
DHCP options: option static-routes
DHCP options: option streettalk-directory-assistance-server
DHCP options: option streettalk-server
DHCP options: option subnet-mask ip-address;
DHCP options: option swap-server ip-address;
DHCP options: option tcp-keepalive-garbage flag;
DHCP options: option tcp-keepalive-interval uint32;
DHCP options: option tftp-server-name
DHCP options: option time-offset int32;
DHCP options: option time-servers ip-address
DHCP options: option trailer-encapsulation flag;
DHCP options: option vendor-encapsulated-options data-string;
DHCP options: option www-server
DHCP options: option x-display-manager
DHCP Safe-Failover Configuration File Statements
DHCP Safe-failover: configuration file statements
DHCP Safe-failover: configuring
DHCP Safe-failover: lease file statements
DHCP Safe-failover: partner-down state
DHCP Safe-failover: server modes
DHCP Safe-failover: server states
DHCP Safe-failover: state file
DHCP statements: allow and deny
DHCP statements: always-reply-rfc1048
DHCP statements: authoritative;
DHCP statements: default-lease-time
DHCP statements: dynamic-bootp-lease-cutoff
DHCP statements: dynamic-bootp-lease-length
DHCP statements: fixed-address
DHCP statements: get-lease-hostnames
DHCP statements: max-delayed-acks
DHCP statements: max-lease-time
DHCP statements: not authoritative;
DHCP statements: requested-options-only flag;
DHCP statements: server-identifier
DHCP statements: shared-network
DHCP statements: use-host-decl-names
DHCP statements: use-lease-addr-for-default-route
DHCP: configuration file declarations
DHCP: configuration file parameters
direct access facility (DAF): X.25
Domain name pointer (PTR) record: DNS
Domain Name Service: resource record
Domain Name Services: database files
Domain Name Services: DNS concept
Domain Name Services: name servers
Domain Name Services: NAMED.BOOT file
Domain Name Services: resource records
Domain Name Services: special commands
Domain Name Services: troubleshooting
EXPORT database: reloading on cluster
Exterior Gateway Protocol (EGP)
Fiber Distributed Data Interface (FDDI): ARP support
Fiber Distributed Data Interface (FDDI): qualifiers
Fiber Distributed Data Interface (FDDI): RARP support
Fiber Distributed Data Interface (FDDI): receive packet rate
Fiber Distributed Data Interface (FDDI): support
Fiber Distributed Data Interface (FDDI): VCI support
File version mapping: NFS<OpenVMS
files: DEC$PRIVATE_SERVER_SETUP.TEMPLATE
files: DECW$PRIVATE_SERVER_SETUP.COM
Files: DECW$PRIVATE_SERVER_SETUP.TEMPLATE
files: DOMAIN-NAME-SERVICE.CACHE
files: IP Security Option (IPSO)
FTP<OpenVMS: RETR, STOR, APPE command qualifiers
FTP<OpenVMS: server implementation
FTP<OpenVMS: startup command file
GATED.CONF file: conflict with ROUTING.COM file
GateD: Router Discovery Protocol
Gateway address: sequence of use
Gateway Routing Daemon (GateD)
Gateway: multiple gateway support
Host information (HINFO) record: DNS
IMAP: configuration directives in .IMAPRC
INITIALIZE/QUEUE command: OpenVMS
INITIALIZE/QUEUE command: Terminal Service Print Services
Integrated Service Digital Network (ISDN) record: DNS
Internet Control Message Protocol (ICMP): redirect messages
IP Security Option (IPSO): automatic startup
IP Security Option (IPSO): basic options
IP Security Option (IPSO): Basic Security Option
IP Security Option (IPSO): commands
IP Security Option (IPSO): extended options
IP Security Option (IPSO): ICMP error messages
IP Security Option (IPSO): implementation, sample
IP Security Option (IPSO): implicit labels
IP Security Option (IPSO): line options
IP Security Option (IPSO): management
IP Security Option (IPSO): protection authorities
IP Security Option (IPSO): security levels
IP Security Option (IPSO): setting options
IP Security Option (IPSO): SHOW IPSO /FULL output
IP Security Option (IPSO): Site-specific authorities
IP Security Option (IPSO): system options
IP Security Option (IPSO): troubleshooting
IP-over-DECnet: line-specific information
IP-over-DECnet: sample configuration
KEEPALIVE: IP<over<X.25 configuration
Kerberos: administration server
Kerberos: ticket<granting ticket
LAN Emulation over ATM: ARP support
LAN Emulation over ATM: qualifiers
LAN Emulation over ATM: receive packet rate
LAN Emulation over ATM: support
LAN Emulation over ATM: VCI support
Line Printer Services (LPS): batch queues
Line Printer Services (LPS): client
Line Printer Services (LPS): LPR command
Line Printer Services (LPS): LPRSMB symbiont
Line Printer Services (LPS): PRINT command
Line Printer Services (LPS): VMSLPRSMB symbiont
logicals: TCPWARE_FTP_KEEP_DIR_EXT
logicals: TCPWARE_FTP_ONLY_BREAK_ON_CRLF
logicals: TCPWARE_FTP_SERVER_LOG_LIMIT
logicals: TCPWARE_FTP_SERVER_RELAXED_PORT_COMMAND
logicals: TCPWARE_ACECLIENT_DATA_DIRECTORY
logicals: TCPWARE_ACECLIENT_NETWORK
logicals: TCPWARE_ACECLIENT_PASSCODE_TIME
logicals: TCPWARE_ACECLIENT_CL
logicals: TCPWARE_ACECLIENT_ENABLE
logicals: TCPWARE_ACECLIENT_REMO
logicals: TCPWARE_ACECLIENT_SHR
logicals: TCPWARE_FTP_220_REPLY
logicals: TCPWARE_FTP_221_REPLY
logicals: TCPWARE_FTP_230_REPLY
logicals: TCPWARE_FTP_421_REPLY
logicals: TCPWARE_FTP_ALL_VERSIONS
logicals: TCPWARE_FTP_ALLOWCAPTIVE
logicals: TCPWARE_FTP_ANONYMOUS_230_REPLY
logicals: TCPWARE_FTP_ANONYMOUS_RIGHTS
Logicals: TCPWARE_FTP_ANONYMOUS_ROOT
logicals: TCPWARE_FTP_DISALLOW_UNIX_STYLE
logicals: TCPWARE_FTP_IDLE_TIMEOUT
logicals: TCPWARE_FTP_MAX_SERVERS
logicals: TCPWARE_FTP_MESSAGE_FILE
logicals: TCPWARE_FTP_PROMPT_NODENAME
logicals: TCPWARE_FTP_RECEIVE_THRESHOLD
logicals: TCPWARE_FTP_SEMANTICS_FIXED_IGNORE_CC
logicals: TCPWARE_FTP_SERVER_DATA_PORT_RANGE
logicals: TCPWARE_FTP_STRIP_VERSION
logicals: TCPWARE_FTP_SYST_BANNER
logicals: TCPWARE_FTP_UNIX_STYLE_BY_DEFAULT
logicals: TCPWARE_FTP_UNIX_STYLE_CASE_INSENSITIVE
logicals: TCPWARE_FTP_username_ROOT
logicals: TCPWARE_KERBV4_MAXAGE
logicals: TCPWARE_KERBV4_PRIMARY
logicals: TCPWARE_KERBV4_REALM
logicals: TCPWARE_KERBV4_RLOGIN
logicals: TCPWARE_KERBV4_RSHELL
logicals: TCPWARE_KERBV4_SRVTYP
logicals: TCPWARE_KERBV4_TELNET
logicals: TCPWARE_KERBV4_TKFILE
logicals: TCPWARE_LPD_DEFAULT_USER
logicals: TCPWARE_LPD_qname_FORM*
logicals: TCPWARE_LPD_qname_OPTION
logicals: TCPWARE_LPD_qname_PARAMETER*
logicals: TCPWARE_LPD_qname_QUEUE*
logicals: TCPWARE_LPR_qname_PRINTER
logicals: TCPWARE_LPR_qname_PRINTER_DEFAULT
logicals: TCPWARE_LPRSM_qname_PRECONN
logicals: TCPWARE_LPRSMB_*_RETRY_INTERVAL
logicals: TCPWARE_LPRSMB_*_TIMEOUT
logicals: TCPWARE_LPRSMB_qname_RETRY_INTERVAL
logicals: TCPWARE_LPRSMB_qname_TIMEOUT
Logicals: TCPWARE_NAMED_MAX_CACHE_TTL
Logicals: TCPWARE_NFS_ACCESS_IDENTIFIER
Logicals: TCPWARE_NFS_DFLT_GID
Logicals: TCPWARE_NFS_DFLT_UID
Logicals: TCPWARE_NFS_DIRLIFE_TIMER
Logicals: TCPWARE_NFS_DIRREAD_LIMIT
Logicals: TCPWARE_NFS_DIRTIME_TIMER
logicals: TCPWARE_NFS_DYNAMIC_EXPORT
Logicals: TCPWARE_NFS_DYNAMIC_PROXY
Logicals: TCPWARE_NFS_FILE_CACHE_SIZE
Logicals: TCPWARE_NFS_LOG_CLASS
Logicals: TCPWARE_NFS_NOCHECKSUM
Logicals: TCPWARE_NFS_OPENFILE_TIMER
Logicals: TCPWARE_NFS_PCNFSD_DFLTPRTOPT
Logicals: TCPWARE_NFS_PCNFSD_ENABLE
Logicals: TCPWARE_NFS_PCNFSD_JOB_LIMIT
Logicals: TCPWARE_NFS_PCNFSD_PRINTER
Logicals: TCPWARE_NFS_PCNFSD_PRINTER_LIMIT
Logicals: TCPWARE_NFS_PCNFSD_SPOOL
Logicals: TCPWARE_NFS_SECURITY
Logicals: TCPWARE_NFS_TCP_THREADS
Logicals: TCPWARE_NFS_UDP_THREADS
Logicals: TCPWARE_NFS_XID_CACHE_SIZE
logicals: TCPWARE_PCNFSD_DFLTPRTOPT
logicals: TCPWARE_PPPD_DEBUG_LEVEL
logicals: TCPWARE_PPPD_OPCOM_LEVEL
logicals: TCPWARE_RES_OPTIONS ndots
Logicals: TCPWARE_TELNETD_INTRO_MSG
Logicals: TCPWARE_TIMED_EXCLUDE
Logicals: TCPWARE_TIMED_INCLUDE
logicals: TCPWARE_TSSYM_*_RETRY_INTERVAL
logicals: TCPWARE_TSSYM_*_TIMEOUT
logicals: TCPWARE_TSSYM_qname_RETRY_INTERVAL
logicals: TCPWARE_TSSYM_qname_TIMEOUT
logicals: TCPWARE_VMSLPRSMB_qname_PRECONN
logicals: TCPWARE_VMSLPRSMB_qname_RETRY_INTERVAL
logicals: TCPWARE_VMSLPRSMB_qname_TIMEOUT
logicals: TCPWARE_VMSLPRSMB_*_RETRY_INTERVAL
logicals: TCPWARE_VMSLPRSMB_*_TIMEOUT
LPD Server: command qualifiers
LPD Server: use of /etc/printcap file
LPR command: Line Printer Services
LPS print forms: DEFINE/FORM qualifiers
LPS print symbionts: TCPWARE_LPRSMB
LPS print symbionts: TCPWARE_VMSLPRSMB
LPS system logicals: VMSLPRSMB tuning logicals
mail delivery mechanisms: using
Mail exchanger (MX) record: DNS
Mailbox information (MINFO) record: DNS
Mailbox rename (MR) record: DNS
Management Information Base (MIB)
MAP command: X.25 mapping database
Maximum transmission unit (MTU): IP<over<X.25 configuration
Miscellaneous utilities & services: CHARGEND service
Miscellaneous utilities & services: DAYTIMED service
Miscellaneous utilities & services: DISCARD utility
Miscellaneous utilities & services: DISCARDD service
Miscellaneous utilities & services: ECHOD service
Miscellaneous utilities & services: FINGERD service
Miscellaneous utilities & services: NETCU DEBUG
Mounting filesystems: Client<NFS
Mounting filesystems: Server<NFS
Multi-Exit Discriminator (MED)
NAMED.CONF options: allow-query
NAMED.CONF options: allow-transfer
NAMED.CONF options: check-names
NAMED.CONF options: fake-iquery
NAMED.CONF options: fetch-glue
NAMED.CONF options: forwarders
NAMED.HOSTS file: overlapping clusters
NETCU GateD commands: CHECK GATED CONFIG
NETCU GateD commands: DUMP GATED STATE
NETCU GateD commands: LOAD GATED CONFIG
NETCU GateD commands: SET GATED TRACE
NETCU GateD commands: SHOW GATED TRACE
NETCU GateD commands: SHOW OSPF ADVERTISE
NETCU GateD commands: SHOW OSPF AS
NETCU GateD commands: SHOW OSPF DESTINATIONS
NETCU GateD commands: SHOW OSPF ERRORS
NETCU GateD commands: SHOW OSPF HOPS
NETCU GateD commands: SHOW OSPF INTERFACES
NETCU GateD commands: SHOW OSPF LOG
NETCU GateD commands: SHOW OSPF NEIGHBORS
NETCU GateD commands: SHOW OSPF ROUTING
NETCU GateD commands: SHOW OSPF STATE
NETCU GateD commands: SHOW RIP
NETCU GateD commands: STOP/GATED
NETCU GateD commands: TOGGLE GATED TRACING
NETCU GateD commands: UPDATE GATED INTERFACES
Network Control Utility (NETCU)
Network File System (NFS): requests and replies
Network interfaces: unnumbered
Network Time Protocol (NTP): Kerberos use of
NFS-to-OpenVMS character sequence mapping
NFS-to-OpenVMS filename translation rules
NFS<OpenVMS Client: attributes data files (ADFs)
NFS<OpenVMS Client: cache space, increasing
NFS<OpenVMS Client: client<server concept
NFS<OpenVMS Client: default UID, setting
NFS<OpenVMS Client: default user, setting
NFS<OpenVMS Client: delta time, using
NFS<OpenVMS Client: disk quotas, displaying
NFS<OpenVMS Client: file protection mask
NFS<OpenVMS Client: file versions, limiting
NFS<OpenVMS Client: GID protection
NFS<OpenVMS Client: GROUP database
NFS<OpenVMS Client: IBM<VM server type setting
NFS<OpenVMS Client: implementation
NFS<OpenVMS Client: master file directory (MFD)
NFS<OpenVMS Client: mount type, setting
NFS<OpenVMS Client: mounting filesystems
NFS<OpenVMS Client: read/write transfer size, setting
NFS<OpenVMS Client: retry time, setting
NFS<OpenVMS Client: security auditing
NFS<OpenVMS Client: server type, setting
NFS<OpenVMS Client: superusers
NFS<OpenVMS Client: TCPWARE server type setting
NFS<OpenVMS Client: template device
NFS<OpenVMS Client: text files, autoconverting
NFS<OpenVMS Client: timeout time, setting
NFS<OpenVMS Client: UIC protection
NFS<OpenVMS Client: user identification
NFS<OpenVMS Client: virtual directory
NFS<OpenVMS Client: volume labels, setting
NFS<OpenVMS Server: delta time, using
NFS<OpenVMS Server: file locking
NFS<OpenVMS Server: filename translation
NFS<OpenVMS Server: implementation
NFS<OpenVMS Server: parameters
NFS<OpenVMS Server: protocol procedures
NFS<OpenVMS Server: reading files
NFS<OpenVMS Server: restrictions
NFS<OpenVMS Server: security features
NFS<OpenVMS Server: STREAM<LF files
NFS<OpenVMS Server: stream_lf-to-variable conversion
NFS<OpenVMS Server: UIC protection
NFS<OpenVMS Server: variable-to-stream conversion
NFS<OpenVMS Server: variable-to-stream_lf conversion
NFS<OpenVMS Server: writing files
NFS_ACCESS_IDENTIFIER parameter
NFS_PCNFSD_DFLTPRTOPT parameter
NFS_PCNFSD_JOB_LIMIT parameter
NFS_PCNFSD_PRINTER_LIMIT parameter
NFSDISMOUNT command: Client<NFS
NFSFile Ownership and Protection
NFSMOUNT /CONFIG command: Client<NFS
NFSMOUNT /SHOW command: Client<NFS
NSLOOKUP utility: error messages
NSLOOKUP utility: EXIT command
NSLOOKUP utility: FINGER command
NSLOOKUP utility: HELP command
NSLOOKUP utility: interactive mode
NSLOOKUP utility: LSERVER command
NSLOOKUP utility: non<interactive mode
NSLOOKUP utility: ROOT command
NSLOOKUP utility: SERVER command
NSLOOKUP utility: SPAWN command
NSLOOKUP utility: VIEW command
NTP access control commands: ignore
NTP access control commands: limited
NTP access control commands: nomodify
NTP access control commands: nopeer
NTP access control commands: noquery
NTP access control commands: noserve
NTP access control commands: notrust
NTP access control commands: ntpport
NTP configuration commands: broadcast
NTP configuration commands: peer
NTP configuration commands: server
NTP monitoring commands: loopstats
NTP monitoring commands: peerstats
NTP monitoring commands: rawstats
Open Shortest Path First (OSPF) routing
OpenVMS File Ownership and Protection
Parameters: NFS_ACCESS_IDENTIFIER
Parameters: NFS_FILE_CACHE_SIZE
Parameters: NFS_OPENFILE_TIMER
Parameters: NFS_PCNFSD_DFLTPRTOPT
Parameters: NFS_PCNFSD_JOB_LIMIT
Parameters: NFS_PCNFSD_PRINTER
Parameters: NFS_PCNFSD_PRINTER_LIMIT
Parameters: NFS_XID_CACHE_SIZE
Password Authentication Protocol (PAP)
PATHWORKS: outgoing access restrictions and
PC<NFS Server (PCNFSD): authentication
PC<NFS Server (PCNFSD): break<in security
PC<NFS Server (PCNFSD): print options
PC<NFS Server (PCNFSD): protocol procedures
PC<NFS Server (PCNFSD): remote printing
PCNFSD authentication services
Point-to-Point Protocol (PPP): authentication
Point-to-Point Protocol (PPP): configuration
Point-to-Point Protocol (PPP): configuring
Point-to-Point Protocol (PPP): function
Point-to-Point Protocol (PPP): PPP link
Point-to-Point Protocol (PPP): troubleshooting
Point<to<Point Protocol (PPP): compatibility with other products
Point<to<Point Protocol (PPP): line speeds
Point<to<Point Protocol (PPP): pppd
Point<to<Point Protocol (PPP): unnumbered interface
PPPD command file parameters: CONNECT
PPPD command file parameters: DISCONNECT
PPPD command file parameters: IPDOWN
PPPD command file parameters: IPUP
PPPD link authentication options: +CHAP
PPPD link authentication options: +PAP
PPPD link authentication options: -CHAP
PPPD link authentication options: -PAP
PPPD link authentication options: AUTH
PPPD link customization options: PASSIVE
PPPD link customization options: PERSIST
PPPD link customization options: SILENT
PPPD options: command file parameters
PRINT command: queues based on PRINTCAP. file
Print symbiont: Terminal Server Print Services
PROXY database: superuser account
pseudo devices: characteristics
receive packet rate: adjusting using NETCU command
Reloading the DHCP Configuration
Remote Copy Program (RCP): password security
Remote Copy Program (RCP): security
Remote Copy Program (RCP): server
Remote Magnetic Tape (RMT) server
Remote Magnetic Tape (RMT): client
Remote Magnetic Tape (RMT): dump service
Remote Magnetic Tape (RMT): dumping and restoring files
Remote Magnetic Tape (RMT): rdump service
Remote Magnetic Tape (RMT): restore service
REMOVE ACE_USER command: NETCU
Responsible person (NS) record: DNS
Reverse Address Resolution Protocol (RARP): disabling using NETCU command
Reverse Address Resolution Protocol (RARP): displaying packets using TCPDUMP
Reverse Address Resolution Protocol (RARP): interface
ROUTE command: X.25 mapping database
Route Through (RT) record: DNS
routing configuration options: -IP
routing configuration options: DEFAULTROUTE
routing configuration options: NETMASK
routing configuration options: PROXYARP
Routing Information Protocol (RIP)
ROUTING.COM file: cluster alias failover
ROUTING.COM file: conflict with GATED.CONF file
Serial Line IP (SLIP): compressed (CSLIP)
Serial Line IP (SLIP): configuration
Serial Line IP (SLIP): configuring
Serial Line IP (SLIP): flowcontrol
Serial Line IP (SLIP): function
Serial Line IP (SLIP): high speed modems
Serial Line IP (SLIP): interface
Serial Line IP (SLIP): line speeds
Serial Line IP (SLIP): numbered interfaces
Serial Line IP (SLIP): protocol
Serial Line IP (SLIP): proxy ARP
Serial Line IP (SLIP): qualifiers
Serial Line IP (SLIP): routing commands
Serial Line IP (SLIP): troubleshooting
Serial Line IP (SLIP): unnumbered interface
SMTP logicals: ALLOW_USER_FROM
SMTP logicals: ALLOW_VIRTUAL_DOMAIN
SMTP logicals: APPEND_FORWARDER_TO_MX
SMTP logicals: DELIVERY_RECEIPTS
SMTP logicals: DISABLE_DELIVERY_RECEIPT_DISCLAIMER
SMTP logicals: DISABLE_FOLDER_DELIVERY
SMTP logicals: DISABLE_PSIMAIL
SMTP logicals: ENVELOPE_FROM_HOST
SMTP logicals: HEADER_RETURN_RECEIPT_TO
SMTP logicals: HOST_ALIAS_FILE
SMTP logicals: MAXIMUM_822_TO_LENGTH
SMTP logicals: NO_USER_REPLY_TO
SMTP logicals: NON_LOCAL_FORWARDER
SMTP logicals: REJECT_INVALID_DOMAINS
SMTP logicals: RETURN_INTERVAL
SMTP logicals: SERVER_DISABLE_VRFYEXPN
SMTP logicals: SERVER_RCPT_CHECK_HOST
SMTP logicals: SERVER_REJECT_INFO
SMTP logicals: SERVER_REJECT_FILE
SMTP logicals: SUPPRESS_VENDOR
SMTP logicals: SYMBIONT_PURGWS_TIMER
SMTP logicals: VMSMAIL_HEADER_CONTROL
SMTP logicals: VMSMAIL_LOCASE_USERNAME
SMTP logicals: VMSMAIL_NO_EXQUOTA
SMTP logicals: VMSMAIL_REPLY_CONTROL
SMTP logicals: VMSMAIL_USE_RFC822_TO_HEADER
SMTP: mail parameters with MAIL-CONFIG
SMTP: service for ALL-IN-1 users
SNMP Multiplexing (SMUX) protocol
SNMP Services: configuration file
SNMP services: extendible MIBs
SNMP services: Management Information Base (MIB)
SNMP services: management objects
SNMP Services: troubleshooting
Start of Authority (SOA) record: DNS
Subnetwork Access Protocol (SNAP): format in TCPDUMP
Superuser: adding to PROXY database
TCP/IP load balancing: address list
TCP/IP load balancing: analogous to LAT
TCP/IP load balancing: cluster names
TCP/IP load balancing: configuration requirements
TCP/IP load balancing: description
TCP/IP load balancing: DNS server
TCP/IP load balancing: load request protocol
TCP/IP load balancing: logicals
TCP/IP load balancing: observed load
TCP/IP load balancing: process
TCP/IP load balancing: TCP connection
TCP/IP load balancing: what it does not do
TCPDUMP utility: ARP and RARP packets
TCPDUMP utility: command reference
TCPDUMP utility: data within packet
TCPDUMP utility: DNS name server
TCPDUMP utility: IP fragmentation
TCPDUMP utility: link level headers
TCPDUMP utility: NFS requests and replies
TCPware Access Control Encryption (ACE) Client
TCPware DECwindows Transport Interface
TCPWARE_CONTROL rights identifier
TCPWARE_FTP_ALLOWCAPTIVE logical
TCPWARE_FTP_ANONYMOUS_230_REPLY logical
TCPWARE_FTP_ANONYMOUS_RIGHTS logical
TCPWARE_FTP_ANONYMOUS_ROOT logical
TCPWARE_FTP_IDLE_TIMEOUT logical
TCPWARE_FTP_username_ROOT logical
TCPWARE_KERBV4_PRIMARY logical
TCPWARE_LPD_DEFAULT_USER logical
TCPWARE_LPRSMB_*_RETRY_INTERVAL
TCPWARE_LPRSMB_qname_RETRY_INTERVAL
TCPWARE_NAMED_MAX_CACHE_TTL logical
TCPWARE_NFS_ACCESS_IDENTIFIER logical
TCPWARE_NFS_DIRLIFE_TIMER logical
TCPWARE_NFS_DIRREAD_LIMIT logical
TCPWARE_NFS_DIRTIME_TIMER logical
TCPWARE_NFS_FILE_CACHE_SIZE logical
TCPWARE_NFS_NOCHECKSUM logical
TCPWARE_NFS_OPENFILE_TIMER logical
TCPWARE_NFS_PCNFSD_DFLTPRTOPT logical
TCPWARE_NFS_PCNFSD_ENABLE logical
TCPWARE_NFS_PCNFSD_JOB_LIMIT logical
TCPWARE_NFS_PCNFSD_PRINTER logical
TCPWARE_NFS_PCNFSD_PRINTER_LIMIT logical
TCPWARE_NFS_PCNFSD_SPOOL logical
TCPWARE_NFS_TCP_THREADS logical
TCPWARE_NFS_UDP_THREADS logical
TCPWARE_NFS_XID_CACHE_SIZE logical
TCPWARE_PPPD_DEBUG_LEVEL logical
TCPWARE_PPPD_OPCOM_LEVEL logical
TCPWARE_TELNETD_INTRO_MSG logical
TELNET<OpenVMS: control functions
TELNET<OpenVMS: exiting status
TELNET<OpenVMS: local flow control
TELNET<OpenVMS: virtual terminals
Terminal Server Print Services
Terminal Server Print Services (TSSYM)
Terminal Server Print Services: /AUTOSTART_ON qualifier
Terminal Server Print Services: autostart queue
Terminal Server Print Services: managing
Terminal Server Print Services: OPCOM messages
Terminal Server Print Services: print queue
Terminal Server Print Services: print symbiont
Terminal Server Print Services: sample configuration
Terminal Server Print Services: spool device
Terminal Server Print Services: tuning logicals
Time Synchronization Protocol (TSP)
Time Synchronization Protocol (TSP): logicals
Time Synchronization Protocol (TSP): master candidate election
Time Synchronization Protocol (TSP): parameters
Time Synchronization Protocol (TSP): timedc
TIMED operation mode: dependent
TIMED operation mode: fixed primary
TIMED operation mode: primary candidate
Token Authentication: ACE/Client
Token Authentication: ACE/Server
Token Authentication: encryption
Token ring: receive packet rate
Trailer packets: disabling using NETCU commands
TRANSLATE command: X.25 mapping database
Troubleshooting: DECwindows transport interface
Troubleshooting: NFS<OpenVMS Client
Troubleshooting: NFS<OpenVMS Server
Troubleshooting: Serial Line IP (SLIP)
Troubleshooting: SNMP Services
Troubleshooting: Terminal Server Print Services
use-lease-addr-for-default-route flag;
VAX P.S.I.: configuration information
VCI: disabling using NETCU command
Well known services (WKS) record: DNS
X Display Manager (XDM) Server
X Display Manager Server: access control
X Display Manager Server: authentication option
X Display Manager Server: configuration file
X Display Manager Server: enabling debug logging
X Display Manager Server: enabling OPCOM logging
X Display Manager Server: installation and setup
X Display Manager Server: removing the domain name part of the host name
X25.CONF file: multiple entries
X25.CONF file: translate example
XNTPDC control message commands
XNTPDC runtime configuration requests
- T -
- U -
- V -
- W -
- X -
